1 Trademark Acknowledgements XEROX®, The Document Company, and the identifying product names and numbers herein are trademarks of XEROX CORPORATION. All other product names mentioned herein are trademarks of their respective companies. All rights reserved. Windows, Windows® 2000, Windows® XP Pro are registered trademarks of Microsoft Corporation.
2 Release Content The following components are new in this release: • Xerox 6030/50 embedded controller version 3.3.06 • Xerox 6030/50 printer firmware version 3.2.04 • Windows 2000/XP GDI driver v3.1.1 (English, French, Italian, German, Spanish and Portuguese) The following components remain unchanged in this release: •...
• Improved messages on the printer user interface for “out of media” conditions • Pass through of Xerox Generic Finishing Interface (GFI) title block information from an external controller such as Accxes. 3.2 Customer Issues Resolved 3.2.1 GDI Driver Support for 30 x 42 The GDI print driver for Windows 2000 and Windows XP now supports 30 x 42 in all languages.
If a finisher is attached, the technician must change NVM setting 20-003 to a value of 2. 4.3 Windows Driver Installation For Windows 2000 and XP, please refer to chapter 1 of the Xerox 6030/6050 Wide Format Windows Driver User Guide for detailed installation instructions. These instructions are on the documentation CD that arrived with the product or available on www.Xerox.com...
5.2 Limitations 5.2.1 GFI Compliance The 6030 and 6050 Printers do not yet fully comply with the Xerox GFI specification. As a result, some system features, such as Automatic Title Block Placement are not supported. The user must manually locate the title block for proper fold orientation.
When canceling a job, every sheet in the job is an entity in the queue and is canceled individually. The canceling operation works a little smoother if the printer is taken off-line first by pressing the [Menu] button before the [Job Cancel] button is pressed. Xerox 6030/50 V3.3.06 Customer Release Notes...