Selecting the Media Cut Mode
Sets the media cutting method when roll media is being used. The following four
media cut methods are available.
•
Standard Portrait
•
Standard Landscape Cuts the roll media to a standard shape when the document is
•
Synchronized
•
Variable Length
The advanced settings are set up on special screens when the <Synchronized> key
and the <Variable Length> key are pressed.
32
Chapter 3 Basic Copy Operations
Cuts the roll media to a standard shape when the document is
fed into the machine vertically.
fed into the machine horizontally.
Cuts the roll media to the same size as the document or in
accordance with the enlargement/reduction percentages. The
top and bottom margins can be set within a range of 0 to 999
mm.
Cuts the roll media to the specified length. This can be
specified within a range of 210 to 15,000 mm.
Refer to "4.8 Cutting Roll Paper" in this manual for further more details on this
function (page 58).