Replacing Roll Paper - Xerox 6030 User Manual

15.2

Replacing Roll Paper

Two rolls of paper can be set into each of the media trays.
[Operations]
Refer to the instructions provided in "2.3 Setting up Media" and set up the
media parameters accordingly after the rolls have been replaced.
1
Open the media tray.
2
Remove the shaft containing the roll paper that
is to be replaced.
3
While pulling on the lever situated in the end of
the roll paper shaft, remove the core of the paper
roll in the direction of the arrow.
Pulling the lever will release the lock
and allow the roll to be removed from the
shaft.
15.2 Replacing Roll Paper
337