Split Drawing - Xerox 6030 User Manual

Split Drawing

It is possible to fragment images that exceed 1,189 mm in length for output purposes.
It is also possible to add marks for positioning purposes on each fragment. A maximum
of 30 fragmentations are possible.
Fragment
length
Settings
The settings for this function are as follows.
Split drawing
mode
Split length
Page number
printing
Paper margin
Alignment mark
printing
232
Chapter 10 Basic Printer Machine Operations
Menu Item
Set to either [Do not split] or [Split].
The default setting is [Do not split].
Sets the width of fragmentation printing within a range of 1,189
to 15,000 mm.
The default setting is [1,189 mm].
Sets whether or not a page number is to be printed.
The page number will be printed in the format of [present page/
number total number of page].
The default setting is [Off].
Sets the margin for the areas where the pages are joined within
a range of 0 to 90 mm.
The default setting is [0 mm].
Sets whether or not to print positioning marks. The default
setting is [OFF].
Fragment
length
1/3
2/3
Description
3/3