Xerox 6030 User Manual page 55

Activate the auto mode to display the table that establishes correspondence between
the document size and media size on the control panel's setup screen. The media size
to be used for each document size is set up on this table.
In the following example (the settings are the values shaded,) an A2 size document
has been enlarged to the A1 size (141.4%) and copied on bond A1 paper. A [No
Paper] error will be triggered if bond A1 paper is not loaded in the tray.
Copy setup screen
Document Size
A0 A1
P a p e r
A0 A0
Size
A1 A1
A2 A2
A3 A3
A4 A4
Custom preset function
Media size
A0 A1 A2
Not Not Not
Selected Selected Selected
Bond Bond Bond
Film Film Film
Vellum Vellum Vellum
The document size is automatically recognized in accordance with the size series
parameters set with the custom presets function. Refer to the section on "Scan Speed"
in "7.2 Setting up the Common Specifications" in this manual for more details (page
107).
A2 A3 A4
A0 A0 A0
A1 A1 A1
A2 A2 A2
A3 A3 A3
A4 A4 A4
A3 A4
Not Not
Selected Selected
Bond Bond
Film Film
Vellum Vellum
• Refer to "4.2 Making Copies in the Auto Mode" in this manual for more details on
the auto mode (page 45).
• You need to refer to the "Media Type for Auto Mode" section in "7.3 Setting up the
Copy Specifications" in this manual for more details on the custom presets (page
118).
A2
Enlarged
Document
3.1 Making Basic Copies
A1
Copy
27