Xerox 6030 User Manual page 144

Code
14 Sets the amount of time that previous
document data are to be stored to enable
copies to be made from the memory.
Once the time set here has elapsed, the
previous document data will be automatically
erased and copies can no longer be printed
from the memory.
15 Sets the amount of time that interruptions can
be carried out.
Once the time set here has elapsed, the
interruption mode will be automatically
cancelled.
Sets whether or not the document scanning
16
width is to be fixed to 36".
17 Sets whether or not the auto mode function to
link with document size series setting.
Sets the density of gray stamp.
18
Operation Procedure
1
Select [Other System Presets] on
the [Custom Presets – System
Presets] screen.
2
Enter the code number with the
use of the keypad, and then press
the [Scroll] button.
The [
field.
116
Chapter 7 Custom Presets / Meter Check
Function
] mark will move to the next
Change
Time (seconds)
Time (seconds)
No: 0 (Scanning at the standard sizes
detected by the document size sensor.)
Yes: 1 (Scanning at a fixed size of 36".)
Link with document size series: 1
Do not link with document size series:
0
Light: 0, Normal: 1, Dark: 2,
Darker: 3, Darkest: 4
Custom Presets – System Presets
Time & Date...
How to start
scanning...
Other System
Presets...
Other System Presets
Code
12
Default
60 seconds
60 seconds
No: 0
Not linked: 0
Normal: 1
Done
Auto Clear/
Timer...
Backlight Off.
Attention
Scan Speed...
Tone...
Done
Current New
0 0
Scroll