Setting Up The System Parameters; Setting The Parameters From The Printer Control Panel - Xerox 6030 User Manual

9.2

Setting up the System Parameters

This procedure sets up all parameters required by the syste

Setting the Parameters from the Printer Control Panel

The following system parameters can be set up from the printer control panel.
Set Date
Spool in HD
AUTO ROLL
SPA PAPER WIDTH Sets the paper width for SP. JIS/ISO A paper. The default
Smoothing
178
Chapter 9 Printer Setup
The items that can be set up on the printer control panel and on Print Services on Web
are different.
It is possible to set these system parameters with the use of the copier control panel
for Xerox 6030 WF and Xerox 6050 WF. If the parameters are set with both the printer
control panel and the copier control panel, the values set most recently will be the
valid parameters.
Refer to "8.2 Operation from the Printer Control Panel" for detailed instructions on
printer control panel operations (page 149).
Menu Item
Sets up the internal clock. The parameters are set in the year,
month, day, hour and minutes in this order.
Sets up the method in which data is stored on the hard disk.
The default setting is [OVERFLOW].
[OVERFLOW] Stores intermediate data that exceeds the
[ALWAYS]
Sets whether the automatic paper switching function from
the roll to the tray and tray to the roll is to be set to [ON] or
[OFF].
The default setting is [OFF].
value is [SP A1].
[SP. A1]
[SP. A2]
Sets whether the pseudo 1200 dpi output should be set to
[ON] or [OFF]. The default setting is [OFF].
m.
Description
capacity of the memory on the hard disk.
Stores all intermediate data on the hard
disk.
620 or 525mm
435 or 440mm