Define Single Pen - Xerox 6030 User Manual

Define Single Pen

Sets the width, color and other pen attributes for HPGL data.
Settings
The settings for this function are as follows.
Pen No.
Width
Color
End style
Joint style
These settings are only valid with HPGL data.
Menu Item
Sets the pen number within a range of 0 to 98.
Sets the line width within a range of 0 to 511.
1 = 0.0635 mm. The actual width of the line will be n
with the line width set to n. The default setting is [2].
Sets the line color at [BLACK] or [WHITE].
The default setting is [BLACK].
Sets the end of the line to [SQUARE], [ROUND], [EXTEND] or
[TRIANGLE]. The default setting is [SQUARE].
Refer to the illustrations on the next page for further details.
Sets joint processing for lines to [UNJOINT], [BEVEL], [MITER]
or [ROUND]. The default setting is [MITER].
Refer to the illustrations on the next page for further details.
Description
Lines may be printed by patches, if the line width is set
to [1].
This setting is only valid for HP-GL and HP-GL/2 EA, EP,
ER, FP, RA, RR, and PE.
10.5 Logical Printer Settings
×
0.0635
213