3
Pull the lever to open the tray cover.
4
Rotate the knob until the media's leading edge
protrudes from the tray outlet.
5
Hold the paper against the baffle and rotate the
knob as the paper passes through the tray outlet
as shown in the illustration
6
Hold the paper taut while operating the cutter to
cut the paper.
CAUTION: Ensure that you utilize the
cutter handle and that you do not slide your
fingers along the metal cutting bar, as it is
sharp.
7
Remove the piece of paper that was cut off, and
close the tray cover.
333
14.3 Manual Cut