Setting Example - Xerox 6030 User Manual

Settings
The settings for this function are as follows.
Auto Mapping
Size
(fixed)
Output
Paper

Setting Example

When the mapping table is set up as shown below, an image with an input size of A3 will
be printed as follows.
230
Chapter 10 Basic Printer Machine Operations
Menu Item
Sets whether the automatic mapping function is to be enabled
or not.
The output paper size that best matches the output image size
will be determined automatically when this function is set to
[Enable]. The values specified in media mapping will be
invalidated.
The value entered here is used as the input size when [Output]
has been specified.
The value entered here is used as the output size when [Media
Type] has been specified.
The paper size displayed will differ in accordance with the
[Input size] parameter set for the Media series.
Sets the size of the output image in relation to the input size
(size mapping).
The paper size selected will differ in accordance with the
[Output size] parameter set for the Media series.
Sets the size of the paper that is to be actually output in relation
to the output size when automatic mapping has been set to
[NO] (media mapping).
There are cases where the input image will be rotated for output
purposes depending on the paper size specified here.
The paper size selected will differ in accordance with the
[Media size] parameter set for the Media series.
Refer to the section on "Media Series" for further details on paper groups (page 212).
Media Mapping
Input size Output size
A0
A1
A2
A3
A4
Size Mapping
Description
Media size
A0 A0
A1 A1
A1 A1
A2
A2
A4 A4