Job Logging - Xerox 6030 User Manual

SETUP FILE
Sets up logical printers. It is possible to set all parameters required for printing, such as
pen width and output paper size.
SYSTEM PARAMETER
Sets up the system's management information, such as the system date and hard disk
usage conditions.
PORT SETTING
Sets up the communication parameters required for connecting to the host machine.
TEST PLOT
Prints out test patterns.

JOB LOGGING

Prints out management logs for completed jobs and details of the errors that occurred
during processing.
OFFLINE PLOT
Reprints the most recently printed job.
BILLING INFO
Displays the number of pages printed and the number of stamps printed up until now.
152
Chapter 8 Knowing Your Printer
Refer to "11.2 Setting up Logical Printers" for logical printer details and operations
(page 255).
Refer to "9.2 Setting up the System Parameters" for logical printer details and
operations (page 178).
Refer to "9.1 Setting up Communication Parameters" for logical printer details and
operations (page 164).
Refer to "11.3 Test Printing" for logical printer details and operations (page 280).
Refer to "11.4 Managing the Various Logs" for logical printer details and operations
(page 281).
Refer to "11.5 Reprinting" for logical printer details and operations (page 285).
Refer to "11.6 Meter Confirmation" for logical printer details and operations (page
286).