Reprinting - Xerox 6030 User Manual

11.5

Reprinting

This function reprints the file that was most recently printed.
It is possible to specify the number of copies to be printed within a range of 1 to 99.
Operation Procedure
MENU
OFFLINE PLOT
OFFLINE PLOT
REPLOT
REPLOT
Printed Copies
Printed Copies
06
REPLOT
SET : to Print.
285
Chapter 11 Setup Using the Printer Control Panel
Reprinting is not possible with the Xerox 6030 WF or Xerox 6050 WF if a copy
operation is performed after a print operation.
In order for reprinting to function, you must have a job saved in memory.
Refer to "8.2 Operation from the Printer Control Panel" for detailed instructions on
printer control panel operations (page 149).
*
1
Press the < > key with [OFFLINE PLOT]
displayed on the parameter selection screen.
2
Press the < > key.
3
Press the < > key.
4
Select the number of copies to be printed (1 to
99) with the use of the < > and < > keys, and
then press the <Set> key.
Press the < > key once it has been set.
Move the cursor to the right and left with
the use of the <
5
Press the <Set> key when [SET:to Print.] is
displayed.
The file will be reprinted accordingly.
> and < > keys.