Recovering From A Power Outage During Installation - Nortel Web Center Portal Installation And Administration Manual

Troubleshooting
Recovering from a power outage during
installation
Introduction
You must take the proper precautions to prevent power failures. If the server is
powered off (for example, accidental power failure) in the middle of an
installation for any component, you must uninstall the component using the
Nortel Networks Symposium Web Center Portal Server and Client Software
CD-ROM, and then perform a fresh install of the component. For more
information about installing Symposium Web Center Portal, refer to Chapter 2,
"Installing the Symposium Web Center Portal software."
To recover from a power outage during Symposium Web Center
Portal database installation
1 Use the Nortel Networks Symposium Web Center Portal Server and Client
Software CD-ROM to uninstall the Symposium Web Center Portal
database.
a. Insert the Nortel Networks Symposium Web Center Portal Server and
b. Click Portal Server.
518
Client Software CD-ROM into the CD-ROM drive.
Result: The InstallShield Wizard Welcome window appears.
Nortel Networks Symposium Web Center Portal
Standard 2.0