Nortel Web Center Portal Installation And Administration Manual page 617

July 2004
#Include /etc/httpd2/conf/mod_jk2.conf
</IfDefine>
9 Save and close the httpd2.conf file.
10 Navigate to the /opt/TOMCAT_HOME/conf/ directory.
11 Use the gedit command to open the jk2.properties file.
12 Add the following lines:
shm.file=/etc/httpd2/logs/jk2.shm
channelSocket.address=127.0.0.1
channelSocket.port=8009
13 Save and close the jk2.properties file.
14 Copy workers2.properties from the SU location to the /etc/httpd2/conf
directory. (This file is used to configure mod_jk2. Its contents appear below.
The URL patterns specified at the end of the file are handled by Tomcat
servlet container.)
[logger]
level=DEBUG
[config:]
file=/etc/httpd2/conf/workers2.properties
debug=0
debugEnv=0
[uriMap:]
info=Maps the requests. Options: debug
debug=0
# Alternate file logger
[logger.file:0]
level=DEBUG
Installation and Administration Guide
Installing the External Web server components on Linux
617