Error Messages During Installation
You may encounter the following error messages during installation. If an error
does occur, take the corrective action(s) described after the appropriate message.
The MMR Operational Measurements database cannot be
configured
The MMR Operational Measurements database cannot be installed.
Action
1. Terminate MMR Setup.
2. Exit Windows.
3. Reboot the PC to effect a clean-up.
4. After the PC reboots, type SHARE at the DOS prompt and press Enter.
5. To start Windows, type WIN and press Enter.
6. Reinstall MMR.
The MMR System database cannot be configured
The MMR System database cannot be installed.
Action
1. Terminate MMR Setup.
2. Exit Windows.
3. Reboot the PC to effect a clean-up.
4. After the PC reboots, type SHARE at the DOS prompt and press Enter.
5. To start Windows, type WIN and press Enter.
6. Reinstall MMR.
Troubleshooting
13 - 9