Device Configuration Commands - Nortel 1120E Administration Manual

34 Configure the provisioning server
Voice Quality
Monitoring (VQMon)
configuration
commands
System commands
Device configuration commands
Server and network configuration commands
•
•
•
Copyright © 2008, Nortel Networks
.
VQMON_PUBLISH
VQMON_PUBLISH_IP
LISTENING_R_ENABLE
LISTENING_R_WARN
LISTENING_R_EXCE
PACKET_LOSS_ENABLE
PACKET_LOSS_WARN
ADMIN_PASSWORD
CAUTION
The syntax of the device configuration file is case sensitive.
Verify that the commands entered follow the case defined in this
document.
SIP_DOMAIN[x] [domain_name] preconfigures the proxy domain
name for all servers. The same configuration can be done through the
domain configuration menu on the IP Phone 1120E.
— x - the number of the SIP domain number from 1 to 5.
— domain_name - the proxy domain name for all servers.
Note: SIP_DOMAIN[x] is provisioned after user logout.
SERVER_IP[x]_[y]_ip_address] configures the primary and secondary
IP address for each domain, two proxies for each domain.
— x - the domain number from 1 to 5.
— y - the corresponding primary and secondary IP addresses. y=1
indicates the primary address and y=2 indicates the secondary
address.
— ip_address - the IP address of the SIP proxy server
SERVER_PORT[x]_[y] [port_number] configures the signaling ports
for each proxy.
— x - the domain number
SIP Firmware Release 1.1 for IP Phone 1120E Administration
NN43112-300 02.03 Standard
PACKET_LOSS_EXCE
JITTER_ENABLE
JITTER_WARN
JITTER_EXCE
DELAY_ENABLE
DELAY_WARN
DELAY_EXCE
SESSION_RPT_EN
SESSION_RPT_INT
27 May 2008