Maintaining Your Machine; Cleaning The Exposure Glass; Cleaning The Exposure Glass Cover; Cleaning The Auto Document Feeder - Ricoh DSc332 Operating Instructions Manual

Maintaining Your Machine

If the exposure glass, exposure glass
cover, or ADF belt is dirty, copy clari-
ty may be reduced. Clean these parts
if they are dirty.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth, and then wipe it with
a dry cloth to remove the water.
Important
❒ Do not use chemical cleaners or or-
ganic solvents, such as thinner or
benzene. If such substances get in-
side the machine or melt plastic
parts, a failure might occur.
❒ Do not clean parts other than those
explicitly specified in this manual.
Other parts should be cleaned only
by your service representative.

Cleaning the Exposure Glass

Clean 1 and 2.
Maintaining Your Machine
Cleaning the Exposure Glass
Cover
Cleaning the Auto Document
Feeder
2
Clean 1 and 2.
ZGJS826E
6
1
143