Security > Network Access Authentication > Network Access Authentication Sessions Information - D-Link DXS-1210-10TS User Manual

D-Link DXS-1210 Series User Manual
From Port / To Port: Select the range of ports to be configured.
Host Mode: Select the host mode option that will be associated with the selected port(s) here. Options to
choose from are Multi Host and Multi Auth. If the port is operated in the multi-host mode, and if one of the
hosts is authenticated, then all other hosts are allowed to access the port. According to 802.1X
authentication, if the re-authentication fails or the authenticated user logs off, the port will be blocked for a
specified period. The port restores the processing of EAPOL packets after the specified period. If the port is
operated in the multi-authenticated mode, then each host needs to be authenticated individually to access
the port. A host is represented by its MAC address and is only hosts that can be authenticated are allowed
network access.
VID List: After selecting the Multi Auth option as the host mode, the following parameter is available. Enter
the VLAN ID to be enabled for authentication. After the client is authenticated, the client will not be re-
authenticated when present on other VLANs. When a port's authentication mode is changed to Multi Host,
the previous authentication VLAN(s) on this port will be cleared..
ReAuth Timer (1-65535): Enter the re-authentication timer value. This value must be between 1 and 65535
seconds. By default, this value is 3600 seconds.
Restart (1-65535): Enter the restart time value used. This value must be between 1 and 65535 seconds.
Click the Apply button to accept the changes made.
Security > Network Access Authentication > Network Access Authentication Sessions Information
The Network Access Authentication Sessions Information is used to view and clear the network access
authentication session information.
Figure 4.185 – Security > Network Access Authentication > Network Access Authentication Sessions Information
Port: Select the port to be queried.
MAC Address: Enter the MAC address of the client.
Protocol: Select the authentication protocol used. Options to choose from are MAC, WAC, and DOT1X.
Clear by Port: Click the Clear by Port button to clear the authentication session information by selected port.
Clear by MAC: Click the Clear by MAC button to clear the authentication session information by selected
MAC address.
Clear by Protocol: Click the Clear by Protocol button to clear the authentication session information by
selected protocol.
Clear ALL: Click the Clear ALL button to clear all authentication session information.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to locate and display all the entries.
113