Table of Contents
Advertisement
DXS/DWS-3200 series CLI Reference Guide
Section 3. ACL Commands
ip access-list
The ip access-list Global Configuration mode command enables the IP-Access Configuration mode and creates
Layer 3 ACLs. To delete an ACL, use the no form of this command.
Syntax
ip access-list name
no ip access-list name
Parameters
•
name — Specifies the name of the ACL. (Range: 0-32 characters)
Default Configuration
The default for all ACLs is deny-all.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to create an IP ACL.
Console(config)# ip access-list ip-acl1
Console(config-ip-al)#
Page 35
Advertisement
Table of Contents
