RRP 1-35 Multi-sheet Bypass Feeder No-Paper
Sensor Assembly (PL 4.3)
Fig 1-65 Multi-sheet Bypass Feeder No-Paper Sensor Assembly
Removal
1.
Remove the Multi-sheet Bypass Feeder Assembly (RRP 1-25).
2.
Loosen the machine screw securing the Multi-sheet Bypass Feeder No-Paper
Sensor Bracket to the Feeder Assembly, and lift the Sensor Bracket off of the
Feeder.
3.
Disconnect P/J108 from the Multi-sheet Bypass Feeder No-Paper Sensor.
4.
Squeeze the Sensor latches and remove the Sensor from the Bracket.
(P/J108)
Volume 1 / Print Engine - FRU RRPs
S4525-108
1-227