Simple Mail Transfer Protocol (Smtp) - Paradyne Hotwire 8300 User Manual

Designated Cost Associated Path Cost to the route for this port.
Designated Bridge Designated Bridge MAC Address.
Forward Number of times this port has changed from any other state to a Forwarding state.
Transmissions
Input Frame Number of frames received.
Output Frame Number of frames transmitted.
Input Discards Number of frames discarded.
Figure 2-75. Bridge Lookup Table
Address MAC Address learned and included in the forwarding table.
Port Port where the MAC Address was learned.
Status How the address was included in the forwarding table. (Currently, only learned will
appear.)

Simple Mail Transfer Protocol (SMTP)

Use the SMTP Details Screen (Figure 2-76.) to configure the SMTP function of the
8300 Endpoint. SMTP is used to forward notification of events to a user-definable
list of up to five recipients. The event notification is sent as an e-mail in the
following format:
From: sender@senderdomain.com
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.
8300-A2-GB20-00 April 2003
2. Web Server Interface
2-79