Paradyne Hotwire 8300 User Manual page 135

The ATM Statistics table is divided into two sections: Transmit (first three
columns), and Receive (next three columns). Each section provides real-time
updates (TimeStamp column) on the following statistics:
ATM Virtual Channel Table Screen
Select the Virtual Channels prompt on the ATM Service Details screen to display a
table
their state and alarm conditions.
Figure 3-30. Virtual Channel Table Screen
The Virtual Channel Table displays status information on the parameters listed
below. These parameters are configured on the Virtual Channel Details screen
(Figure 3-31.):
VPI Virtual Path Identifier number.
VCI Virtual Channel Identifier number.
Admin Status Current Admin Status.
Oper Status Current Operation Status.
Last Change Time and date of the Last Change.
8300-A2-GB20-00
Frames current number of good frames transmitted/received
−
Bytes current number of bytes transmitted/received
−
Errored Frames current number of frames transmitted/received in error
−
(Figure 3-30) of all Virtual Channels on a specific ATM service along with
Values: Up, Down, Testing
Values: Up, Down, Testing
April 2003
3. VT100 Interface
3-33