Table of Contents
Advertisement
Network
The Network screen
interface's configuration.
Figure 3-7.
The Network screen parameters are described in the following paragraphs.
Unit Type
Selects the unit type. TU-R represents a CPE terminal unit; TU-C represents a CO
terminal unit.
Discovered
Displays the number of discovered repeaters in this span.
Repeaters
Line Rate
Displays the actual negotiated line rate.
Maximum Line Rate
Displays the maximum physical line rate.
Transmission Mode
Displays the actual transmission mode (Annex-A or Annex-B). Annex-A must be
used for U.S. and Canadian deployments.
Expected
Provisions the number of repeaters in the selected span.
Repeaters
8300-A2-GB20-00
(Figure
Network Screen
Values: TU-R, TU-C
Default: TU-R
Values: 0
8
−
Default: 0 (zero)
April 2003
3-7) lets you view and make changes to the Network
3. VT100 Interface
3-7
Advertisement
Table of Contents
