Table of Contents
Advertisement
8300-A2-GB20-00
— User configurable scrambling/descrambling of ATM cell Payload using
43
an x
+1 polynomial
— User configurable time slot multiplexing between the CBR port and the
Serial port
— For Nx64 basic and CAS services, the user can individually
configure the CES channels for the CBR port or for the Serial port
— For Unstructured E1 service, the user can configure all channels for
either the CBR port or the Serial port
IP Gateway
— 10/100BaseT Ethernet port
— Static routes
— Static Address Resolution Protocol (ARP)
— Dynamic routing protocols, including RIP 1, RIP 2, and OSPF
— Unnumbered network
— Address Management: NAT and DHCP
— Bridging
— Programmable alarm thresholds
— IPoA
Serial Port Configurable for PPP or CES
— Supports V.35, V.36, EIA-530, or RS-232
— PPPoA
Management Interfaces
— An innovative web-based user interface
— Embedded HTTP server for remote configuration and real-time
reporting via web browser
— Decreased installation and configuration time for service employees
— Simplified troubleshooting and fault isolation of network problems
— Optimal management of ATM-based services
— Saves and downloads configuration files from remote server
— EOC for SHDSL-related parameters
— SNMP
— VT100
April 2003
1. About the Hotwire 8300 Endpoint
1-5
Advertisement
Table of Contents
