Paradyne Hotwire 8300 User Manual page 138

Endpoint
Hide thumbs Also See for Hotwire 8300:
Table of Contents

Advertisement

3. VT100 Interface
Category
ATM service category. Possible values include CBR, VBR, and UBR.
Param 1 (PCR)
Peak cell rate in cells per second.
Param 2 (SCR)
Sustainable cell rate in cells per second. Applicable only to VBR service category.
Param 3 (MBS)
Maximum burst size in cells. Applicable only to VBR service category.
Row Status
QoS Profile Row Status. Possible values include Active and Not in Service.
Selecting one of the available <Ndx> entries on the Quality of Service Profile
screen will display a screen similar to the screen shown in
screen to configure or change the QoS parameters listed below.
Figure 3-33. QoS Profile Details Screen
Category
ATM service category.
Param 1 (PCR)
Peak cell rate in cells per second to use for all channels using this QOS profile.
Param 2 (SCR)
Sustainable cell rate in cells per second to use for all channels using this QOS
profile. Applicable to VBR only.
Param 3 (MBS)
Maximum burst size to use for all channels using this QOS profile. Applicable to
VBR only.
Row Status
Current status of the profile.
3-36
Values: CBR, VBR, UBR
Default: UBR
April 2003
Figure
3-33. Use this
8300-A2-GB20-00

Advertisement

Table of Contents
loading

Table of Contents