Communication Protocol Options - Paradyne 7974 User Manual

Table A-10. Telnet Session Options

Communication Protocol Options

The Communication Protocol configuration options specify the information
necessary to support the IP communication network, including IP address and link
protocols. Initial values are determined by the configuration you currently have
loaded.
To access the Communication Protocol Options screen, follow this menu selection
sequence:
7900-A2-GB21-20
Disconnect Time (Minutes)
Possible Settings: 1 – 60
Default Setting: 5
Number of minutes of user inactivity before a Telnet session terminates automatically.
Time out is based on no keyboard activity.
T
Disconnect Time (minutes) appears only when the Inactivity Timeout option is
enabled. It does not appear when the unit is connected to a DSLAM card running in
IP Conservative mode.
1 – 60 – The Telnet session is closed after the selected number of minutes.
Main Menu Configuration
Management and Communication
main/config/management/communication
COMMUNICATION PROTOCOL OPTIONS
Node IP Address:
Node Subnet Mask:
Default Network Destination:
Communication Port
IP Address:
Subnet Mask:
Link Protocol:
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
December 2001
Current Configuration
Communication Protocol
000.000.000.000
000.000.000.000
None
000.000.000.000
000.000.000.000
PPP
A. Configuration Options
Model: 797x
Clear
Clear
Clear
Clear
MainMenu Exit
A-23