Table of Contents
Advertisement
Type Details Button
Clicking the Type Details button on the Service Details screen will let you view
(and, in some cases, change) interface parameters for the specified service. The
details displayed depend on the type of service currently in effect for the selected
service. You will see this same screen if you click on the service under the Type
column on the Services screen.
IP Service Details Screen
Access the IP Service Details screen by clicking the IP link under the Type column
on the Services screen. Both the IP Service Details and the Ethernet Stats
screens are described in
ATM Service Details Screen
Access the ATM Service Details screen
the Type column on the Services screen. The ATM Service Details screen lets you
access the configuration parameters described in the paragraphs below.
Figure 2-25. ATM Service Details Screen
The Configuration table on the ATM Service Details screen is used to set the
following configuration parameters:
8300-A2-GB20-00
10/100 Ethernet (IP Service Details)
Max VCC (Virtual Channel Connection) – Represents the maximum number of
Virtual Channel Connections on this ATM link. By default, each VCC will
equally share the available bandwidth. This value should be kept as low as
possible to avoid wasting bandwidth. The default value is 4.
April 2003
2. Web Server Interface
on page 2-22.
(Figure
2-25) by clicking on ATM under
2-27
Advertisement
Table of Contents
