Table of Contents
Advertisement
1. About the Hotwire 8300 Endpoint
Features Summary
1-4
Allows for continued use of existing TDM equipment by supporting CES via
AAL1.
Reduces the need for costly routers with its IP Gateway feature.
Offers easy installation and configuration, reducing maintenance and
sparing costs.
Controls recurring ATM access costs by optimizing the use of valuable
bandwidth.
Allows for use of existing routers without changing the external router's
configuration by running PPP over an ATM network.
Powerful core architecture
— SHDSL network port for symmetrical data rates ranging from 192 kbps
to 2.312 Mbps
— T1 or E1 circuit emulation
— 10/100Base-T Ethernet port and asynchronous Supervisory port
— Serial data port, user-selectable V.35, V.36, RS-232, or EIA-530
— Intuitive web browser for management
CES
— Constant Bit Rate (CBR) port configurable for T1 or E1 supporting the
following modes:
— Unframed T1
1.544 Mbps raw bit stream
−
— T1 ESF
— T1 D4
— Unframed E1 (G.703) framing
— E1 CCS framing
— E1 CAS framing
— AAL1 ATM encapsulation
— Structured Nx64 basic service supporting full or partial T1/E1
circuits
— Structured Nx64 service with Channel Associated Signaling (CAS)
supporting E1 CAS signaling, T1 robbed-bit signaling, and full or
partial T1/E1 circuits with signaling
— Unstructured service (2.048 Mbps E1 or 1.544 Mbps T1)
— Configurable for synchronous or adaptive timing
— User configurable Cell Delay Variation
— User configurable partial cell fill
April 2003
2.048 Mbps raw bit stream
−
8300-A2-GB20-00
Advertisement
Table of Contents
