Table of Contents
Advertisement
Write Community
Accepts a character string identifying the group authorized to perform write
operations. The default setting is Private.
Trap Community
Accepts a character string, which is included in SNMP traps generated by the unit.
The default setting is Public.
Trap IP Address
Accepts the IP Address of a network device where alarm reporting traps are to be
sent.
Trap Log
A trap is a mechanism that permits a device to send an alarm for certain network
events to an SNMP management station. The Trap Log screen
shows all generated traps.
The table shown in this screen lists each trap by its Index number, and displays
the type of error captured by the trap (Trap Number) and the date and time that the
trap was stored (Time Stamp).
Click the hyperlink at the top of the screen to display the latest trap information in
the table. To remove all trap information stored in memory, click the Delete All
Traps button at the bottom of the screen (not shown in the figure below).
Figure 2-39. Trap Log Screen
8300-A2-GB20-00
April 2003
2. Web Server Interface
(Figure
2-39)
2-47
Advertisement
Table of Contents
