Table of Contents
Advertisement
The user-activated input control buttons are described below:
8300-A2-GB20-00
Button
Description
RESET
Provides a hardware reset to the unit.
CONFIG
Sets the unit back to its factory default Ethernet or HDLC configuration;
this is the same as a maintenance reset.
To initiate this function, you must press and hold the CONFIG button
during a power-up sequence. The CONFIG button must be held until the
MODE LED lights amber and remains illuminated for the default
configuration to take effect.
April 2003
1. About the Hotwire 8300 Endpoint
1-7
Advertisement
Table of Contents
