Table of Contents
Advertisement
3. VT100 Interface
You can configure or change the above-listed parameters on the Static TCP Trans
Details screen
(Figure
3-56), which is accessed by selecting the appropriate
<Ndx> number on the Static TCP Trans Table screen.
Figure 3-56. Static TCP Translation Details Screen
N A T P o r t s S c r e e n
The parameters on the NAT Ports screen
(Figure
3-57) define the NAT
global/Internet and local/Corporate ports. These parameters are configured in the
NAT Ports Details screen shown in
Figure
3-58. Access the NAT Ports Details
screen by selecting the <Ndx> number of the desired port on the NAT Ports
screen.
Figure 3-57. NAT Ports Screen
Enable
Enables or disables the NAT port. Default is Enable.
3-65
8300-A2-GB20-00
April 2003
Advertisement
Table of Contents
