3. VT100 Interface
Save and Restart
Selecting Save and Restart will display a confirmation menu as shown in
Figure
the restart.
NOTICE:
Figure 3-5.
Interfaces
As shown on the Interfaces screen
interfaces: Network, CBR, Serial, Ethernet, and Supervisory. Each of these is
described in detail below.
Figure 3-6.
3-6
3-5. Select yes to save the current configuration settings and proceed with
Performing a Maintenance Reset or a Save and Restart will
terminate communications with the unit. Refresh (by pressing
Ctrl+U) after approximately 10 seconds to restore communications.
Confirmation Screen
Interfaces Screen
April 2003
(Figure
3-6), the 8300 Endpoint has five
8300-A2-GB20-00