Table of Contents
Advertisement
3. VT100 Interface
Span Configuration
Represents a span configuration profile in the Span Configuration Profile Table,
which applies to this span. By default, this object will have the value DEFVAL (the
index of the default profile).
Span Alarm
Represents an Alarm configuration profile in the Endpoint Alarm Configuration
Profile Table. The alarm threshold configuration in the referenced profile will be
Configuration
used by default for all segment endpoints in this span. Individual endpoints may
override this profile by explicitly specifying some other profile in the table. By
default, this object will have the value 'DEFVAL' (the index of the default profile).
Pair 1 Mode
Represents the status and details status of the span for two-wire operation.
Pair 2 Mode
Represents the status and details status of the span for four-wire operation. This
mode is not supported by the 8300 Endpoint.
EOC In
Displays the number of messages received on the Embedded Operations
Channel.
EOC Out
Displays the number of messages transmitted on the EOC Embedded Operations
Channel.
The Network screen provides the user-activated prompts described below.
Configuration Profiles Screen
Selecting the Configuration Profiles prompt on the Network screen will display the
screen shown in
3-8
Values: User Span Profile 1, User Span Profile 2, DEFVAL (Default Value)
Default: DEFVAL
Values: User Alarm Profile 1, User Alarm Profile 2, User Alarm
Profile 3, DEFVAL (Default Value)
Default: DEFVAL
Prompt
Function
Configuration Profiles
Displays the three configuration profiles that can be used.
Alarm Profiles
Displays the four alarm profiles that can be used.
Span Endpoints
Lists the currently available span endpoints.
Figure
3-8.
April 2003
8300-A2-GB20-00
Advertisement
Table of Contents
