Paradyne Hotwire 8300 Installation Instructions Manual
  1. Manuals
  2. Brands
  3. Paradyne Manuals
  4. Modem
  5. Hotwire 8300
  6. Installation instructions manual

Paradyne Hotwire 8300 Installation Instructions Manual

Endpoint
Hide thumbs Also See for Hotwire 8300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
®
Hotwire
8300 Endpoint
Installation Instructions
Document Number 8300-A2-GN10-00
April 2003
Contents
...................................................................................................
................................................................................................
................................................................................................... 14

Product Documentation Online

Complete documentation for this product is available at www.paradyne.com. Select
Support
Technical Manuals
Select the following documents:
8300-A2-GB20
Hotwire 8300 Endpoint User's Guide
8335-A2-GB20
Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, User's Guide
To order a paper copy of a Paradyne document, or to speak with a sales representative,
please call 1-727-530-2000.
.....................................................................
.........................................................................................
..............................................................................
...................................................................
.......................................................................
............................................................................
..............................................................................
........................................................................
........................................................................ 12
..................................................................................... 14
Hotwire DSL Systems .
............................................................. 13
...................................... 13
1
............................. 10
................................. 11
1
2
2
3
4
6
6
7
7
8

Advertisement

Table of Contents
loading

Related Manuals for Paradyne Hotwire 8300

Summary of Contents for Paradyne Hotwire 8300

  • Page 1: Table Of Contents

    Hotwire 8300 Endpoint User’s Guide 8335-A2-GB20 Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, User's Guide To order a paper copy of a Paradyne document, or to speak with a sales representative, please call 1-727-530-2000..12 ... 13 Hotwire DSL Systems .

  • Page 2: Package Checklist

    A physical connection to a PBX, if used, and an RJ48C modular cable For additional information, see the 8300 User’s Guide . Before you install the unit, please refer to the Be sure to register your warranty at www.paradyne.com/warranty. Important Safety Instructions on page 12.

  • Page 3: Installing The Power Cord

    Installing the Power Cord The POWER port on the unit is a standard, grounded, three-prong connector. The unit has no power switch. Figure 1. Hotwire 8300 Endpoint Back Panel Procedure 1. Insert the power cord’s receptacle into the POWER jack.

  • Page 4: Front Panel Leds And Switches

    Front Panel LEDs and Switches The front panel’s LED status indicators are described below: Indicator Description Normally, this indicator lights green . MODE The indicator lights amber while configuration is being set by the front panel buttons or when the configuration is changed by SNMP or through the web interface.
  • Page 5 A VT100 terminal or a PC providing VT100 terminal emulation must be used to set up access to and management of the unit. Procedure 1. Configure the PC so it is compatible with the Hotwire 8300 unit: — Baud Rate set to 19.2 kbps. — Character length set to 8 data bits.

  • Page 6: Connecting The Ethernet Port

    Connecting the Ethernet Port The unit provides a single Ethernet interface port for IP Gateway, SNMP, and Web browser access. This interface is an eight-pin modular jack that complies with standard twisted-pair, 10/100BaseT requirements. Procedure 1. Insert one 8-pin connector of your Ethernet cable (not provided) into the 10/100_ETHERNET port.

  • Page 7: Connecting The Cbr Port

    Connecting the CBR Port The CBR (Constant Bit Rate) port is an RJ48C, eight-pin modular jack that is software-selectable for T1 or E1. As a T1 port, it terminates as 100 ohms, and as an E1 port at 120 ohms. This port is used to transport TDM traffic using a T1/E1 framer to provide ATM adaptation Layer 1 with Circuit Emulation Services (AAL1-CES).

  • Page 8: Web Interface

    Web Interface If you will use the Ethernet port for the web interface, you must set the IP address of the port, or use the default address of 192.168.6.1. The IP address of the 8300 Endpoint must be on the same subnet as the PC accessing the web interface. Setting the Ethernet Port Address To set the Ethernet port address: Procedure...
  • Page 9 Accessing the Web Interface To access the web interface: Procedure 1. Start your web browser. Microsoft Internet Explorer version 5.0 or higher is recommended. 2. Type the IP address of the 8300 Endpoint’s Ethernet port into the Address field of the browser and press Enter.

  • Page 10: Notice To Users Of The United States Telephone Network

    The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Paradyne Corporation. If the equipment includes a ferrite choke or chokes, they must be installed per the installation instructions.

  • Page 11: Notices To Users Of The Canadian Telephone Network

    Ringer Equivalence Numbers of all the devices does not exceed five. CE Marking When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.com. Select Library Technical Manuals CE Declarations of Conformity.

  • Page 12: Important Safety Instructions

    Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. This product is intended to be used with a 3-wire grounding type plug — a plug which has a grounding pin. This is a safety feature. Equipment grounding is vital to ensure safe operation.

  • Page 13: Supplier's Declaration Of Conformity

    Largo, FL 33773-1502 Date of Issue: 4/4/2003 Paradyne Corporation, located at the above address, hereby certifies that the Hotwire® Model Number 8300-AX-400, bearing labeling identification number US:AW2DLNAN8300-AX complies with: the Federal Communications Commission's ("FCC") Rules and Regulations 47 CFR Part 68, the Administrative Council on Terminal Attachments ("ACTA")-adopted technical criteria: TIA-968-A, "Telecommunications -...

  • Page 14: Document Feedback

    Document Feedback We welcome your comments and suggestions about this document. Please mail them to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to userdoc@paradyne.com. Include the number and title of this document in your correspondence. Please include your name and phone number if you are willing to provide additional information.
  • Page 16 *8300-A2-GN10-00* *8300-A2-GN10-00*...

Table of Contents