Maintenance Reset - Paradyne Hotwire 8300 User Manual

2. Web Server Interface
The Unit screen provides the following user-activated buttons:

Maintenance Reset

Use this button to perform a Maintenance Reset. All configurations will be lost and
the unit will be set back to an initial factory configuration. There are five options for
a Maintenance Reset as shown in the table below.
RFC 1483
Configuration Encapsulated
Choice Data
Ethernet Yes
Serial HDLC Yes
T1 CBR* Yes
E1 CBR Yes
Serial CES Yes
Configuration
* Factory default configuration
All the factory configurations set up an ATM service on the Network port with one
configured virtual channel (VPI=0, VCI=32). Management data received on this
channel (either WEB or SNMP) will be processed at the unit if it is encapsulated
using RFC 1483 and directed to the unit's IP address. (A Maintenance Reset will
not change the unit's IP address.)
The Serial HDLC configuration and the T1 CBR configuration will also accept
PPPoA encapsulated data and deliver it to the Serial port.
The T1 CBR, E1 CBR, and Serial CES configurations set up a CES service
between the Network port and the T1/E1 CBR port or the Serial port using VPI=0,
VCI=33. The T1 CBR configuration sets up the CBR port to run T1 and has 24
channels delivered to the CES service. The E1 configuration sets up the CBR port
to run E1 and has 31 channels delivered to the CES service. The Serial CES
configuration sets up the CBR port to run E1, but allocates Channels 1
Serial port.
Clicking the Maintenance Reset button will display a selection screen with a
drop-down list of the available configurations as shown in
2-4
Button Function
Submit Sets any values that have been changed. Use the top Submit
button to set unit parameters changed in the upper section of the
screen, and the lower Submit button to set the real-time clock.
Maintenance Reset Resets unit to its default configuration.
Save and Restart Saves the current configuration and restarts the unit.
IP Serial HDLC
Encapsulated Encapsulated
in ATM in ATM
Yes No
No Yes
No Yes
Yes No
Yes No
April 2003
T1 CBR E1 CBR
Channels Channels
None None
None None
1 2 4 None
−
None 1 3 1
−
None None
Figure
Serial CBR
Channels
None
None
None
None
1 3 1
−
3 1 to the
−
2-2.
8300-A2-GB20-00