Table of Contents
Advertisement
Web Server Interface
The 8300 Endpoint has an innovative, embedded web-based user interface for
remote configuration and real-time reporting via Microsoft Internet Explorer 5.0 or
higher. Access to the web server interface and how the interface is used to
configure the 8300 Endpoint are described in detail below.
NOTICE:
NOTICE:
Configuration through the VT100 interface is covered in
Interface
8300-A2-GB20-00
Use of Microsoft's Internet Explorer 5.0 or higher is recommended.
If you use other Internet browsers to access the web server
interface, some screen elements will not be displayed as described
in this manual.
The material presented in this chapter follows the order listed in the
navigation bar on the left side of the Web Server interface screen.
However, because the parameters you specify in the Service Table
attach protocols to interfaces, you must configure the Service Table
first. (See
Services
on page 2-25.) You will not be able to allocate
channels (see
Channel Table Details Screen
Service Table has been configured.
.
April 2003
2
on page 2-38) until the
Chapter 3, VT100
2-1
Advertisement
Table of Contents
