Paradyne Hotwire 8300 User Manual page 46

2. Web Server Interface
NOTICE:
To change an ATM Service configuration, enter the desired value for each
parameter and click on the Submit button.
The Status table provides the following status information on the circuits:
The Bandwidth Status table provides bandwidth information for three service
categories showing the allowed and allocated bandwidth for each.
The ATM Service Details screen provides the user-activated buttons described
below.
2-28
Max VPI Bits – The default Max Virtual Path Identifier Bits value is 3 for VPI
values ranging from 0 to 8.
Max VCI Bits – The default Max Virtual Channel Identifier Bits value is 6 for
VCI values ranging from 32 to 63.
Oversubscription Factor
interface. Used for VBR and UBR VC connection admission control to allow
either the VBR or UBR service category connections to collectively use more
bandwidth than is available to make use of the statistical multiplexing of the
connections. Values range from 1 to 10. A value of 1 indicates no
oversubscription. A value of 5 indicates 5 times oversubscription of both VBR
and UBR is permitted.
CBR connections cannot be oversubscribed Also, if CES is in use
on the interface, PCR is limited for all AAL5 connections to the
amount the line rate can support above the commitment for CES,
and the oversubscription applies only to bandwidth above the CES
commitment.
OperStatus (Operation Status) - the current operational status for the ATM
interface.
Opened VCCs the current number of open virtual channel connections.
−
Unopened VCCs the current number of unopen virtual channel connections.
−
Line Bandwidth the current line bandwidth on the ATM Network interface
−
expressed in cells per second.
AAL5 Bandwidth the current ATM bandwidth available for AAL5 traffic. This
−
value is the line bandwidth less the bandwidth needed for AAL1 CES.
QoS 0 PCR the current peak cell rate configured for any virtual channels
−
using default QoS profile.
Button Function
Submit Sets any values that have been changed.
ATM Statistics Displays the current ATM statistics.
Virtual Channels Displays configured VCCs.
QoS Profiles Displays configured QoS profiles.
April 2003
The current over-subscription factor for this ATM
−
8300-A2-GB20-00