Table of Contents
Advertisement
NOTICE:
Select the Unit Access Table prompt on the IP Details screen to view the Unit
Access Table
may access the unit's parameters. If no IP networks are supplied, any host may
access the unit. Select any Index number on the table to view the Unit Access
Details (Figure 3-24.) that correspond with that Index number.
Figure 3-23. Unit Access Table Screen
Figure 3-24. Unit Access Details Screen
Supervisory
The Supervisory screen
Supervisory port interface along with other parameters as described below. The
Supervisory port supports only asynchronous character formats.
8300-A2-GB20-00
If you manually change the IP Address, you must Save and Restart.
Save and Restart
(See
on page 3-6.)
(Figure
3-23), which specifies up to 10 different IP networks that
(Figure
3-25) displays the current speed of the
April 2003
3. VT100 Interface
3-27
Advertisement
Table of Contents
