Service Details Screen - Paradyne Hotwire 8300 User Manual

2. Web Server Interface

Service Details Screen

Clicking on an index number under the Service Index column will display a Service
Details screen such as the one shown below
selected service type is CES.)
Figure 2-24. Service Details Screen
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you click on Submit and return to the previous
screen.
Interface Selecting one of the interfaces will bring up a screen where you can view interface
parameters. These screens are the same ones displayed when you select a
sub-menu from the Interfaces screen described earlier on page 2-5.
Type Selecting one of the services listed under the Type column will bring up a screen
where you can view (and, in some cases, change) parameters for each type of
service. The details displayed depend on the type of service currently in effect.
These screens are shown and described below according to each type of service.
In addition, the Service Details screen provides the following user-activated
buttons:
Interface Details Button
Clicking the Interface Details button on the Service Details screen lets you view
interface parameters for the selected service. You will also see the interface
parameters for the selected service if you click on the interface under the Interface
column on the Services screen.
2-26
Button Function
Submit Sets any values that have been changed.
Interface Details Opens the Details screen for the Interface of the currently selected
service.
Type Details Opens the Details screen for the Type of the currently selected
service.
April 2003
(Figure 2-24). (In this example, the
8300-A2-GB20-00