Table of Contents
Advertisement
2. Web Server Interface
Packet Rate
Packet Rate must be configured to the desired port speed (in bits per second).
Bundling
Selects whether the DTE channel assignment is made as a Contiguous group or
as Alternate channels. Selecting Alternate ensures ones density. Because the unit
allows individual channels to be configured for a service, a value of Arbitrary will
be returned for this parameter if the current channel allocation is not contiguous or
Alternate. The Arbitrary value can only be supplied by the unit
the user.
NOTICE:
Start Channel
Selects the starting channel in the 24-channel DS1 bit stream. Starting with the
specified channel, the unit automatically assigns the channels that follow.
Number of
Specifies the number of channels to be assigned to the DTE.
Channels
Format
Selects the port's operating mode.
Tx Clock
Selects the clock the unit uses to sample the data transmitted from the DTE. When
set to Internal, the data is sampled directly with the transmit data clock that is also
supplied to the DTE as Transmit Clock. The External option uses the external
clock from the DTE.
NOTICE:
Tx Invert Clock
Changes the clock edge used to sample data received from the DTE.
Flow Control
Selects the type of flow control to be used if the port is asynchronous.
2-20
Values: 64
2 304 kbps
−
Default: 2048 kbps
Values:Contiguous, Alternate, Arbitrary
Default:Contiguous
Because Alternate Bundling assigns every other channel, only half
the channels are available.
Values:1
2 4 for T1; 0
3 1 for E1
−
−
Default:1
Values:0
2 4 for T1; 0
3 2 for E1
−
−
Default:24 Channel Rate
Values: Sync, Async
Default: Sync
Values:Internal, External
Default:Internal
The External option is valid only in Packet mode.
Values:Disable, Enable
Default:Disable
Values: None, Xon/Xoff, RTS/CTS
Default: None
April 2003
it cannot be set by
−
8300-A2-GB20-00
Advertisement
Table of Contents
