Paradyne Hotwire 8300 User Manual page 76

2. Web Server Interface
Figure 2-47. ARP Table Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address The IP Address of the unit for which you want to define the MAC Address.
MAC Address The MAC Address of the host to be reached.
ARP Status Displays whether this static ARP entry is enabled or disabled.
The Static ARP Table screen provides the following user-activated buttons:
A R P D e t a i l s S c r e e n
Access the ARP Details screen
numbered link under the Index column on the ARP Table screen.
Figure 2-48. ARP Details Screen
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. Currently, this is always the LAN.
2-58
Button Function
ARP Details Displays details of ARP tables.
Dynamic ARP Table Displays the dynamically learned MAC <-> IP Address.
Add New Adds a new static ARP.
April 2003
(Figure 2-48) by clicking on the appropriate
8300-A2-GB20-00