Table of Contents
Advertisement
Services
The Service Table screen
services and displays the Interface, Type, and Pair parameters for each service.
Figure 3-26. Service Table Screen
Adding a Service
To add a service, select the Add Service prompt on the Service Table screen. A
new service listed by the next incremental index number will appear on the screen.
The Interface for the newly added service will be Unassigned. To assign an
interface for the new service, select its index number, which will take you to the
Service Details screen where you can specify parameters as described below.
NOTICE:
Service Details Screen
Selecting a number from the <Index> column will display a Service Details screen
such as the one shown below
type is ATM.)
8300-A2-GB20-00
(Figure
3-26) provides a view of the unit's defined
Any changes to settings in the Service Table require a Save and
Restart for them to take effect.
(Figure
April 2003
3-27). (In this example, the selected service
3. VT100 Interface
3-29
Advertisement
Table of Contents
