Table of Contents
Advertisement
UAS
Vendor ID
8300-A2-GB20-00
Sets the threshold for the number of Unavailable Seconds within any given
15-minute performance data collection interval. If the value of UAS in a
particular 15-minute collection interval reaches/exceeds this value, a trap is
generated. One trap will be sent per interval per endpoint. A value of 0 (zero)
disables the trap.
NOTICE:
Any changes to the above-listed parameters must be followed by
a Submit for the changes to take effect.
Span Endpoints Screen
Clicking on the Span Endpoints button on the Network screen will display the
screen shown in
Figure
2-9.
Figure 2-9.
Span Endpoint Table Screen
This screen displays each endpoint of the span. If the SHDSL link is not up, only
the local side of the span is displayed. The EOC channel is used to access the
remote end unit
Clicking on the highlighted (linking) Type identifier in the table on the Span
Endpoints screen will display the Span Endpoints Details screen
This table supports retrieval of unit inventory information available via the EOC
from units on an SHDSL line, and provides details regarding the parameters
listed below.
Figure 2-10. Span Endpoint Details Screen
Displays the Vendor ID as reported in an Inventory Response message.
April 2003
2. Web Server Interface
(Figure
2-10).
2-11
Advertisement
Table of Contents
