Paradyne Hotwire 8300 User Manual page 26

2. Web Server Interface
Configuration Profile Table Screen
Clicking on the Configuration Profiles button on the Network screen will display the
table shown in
Figure 2-5.
This table displays the information the user specifies in the Configuration Profile
Details screen
Name hyperlink in the table above.
Figure 2-6.
This screen lets you configure or change the following information about the
selected configuration profile:
Wire Mode Displays the type of wire interface used by the span. The 8300 Endpoint supports
only the two-wire mode.
Data Rate (Min) Sets the minimum attainable data rate in the span.
Data Rate (Max) Sets the maximum attainable data rate in the span. Note that the line rate will be
8 kbps above the data rate.
2-8
Figure 2-5.
Configuration Profile Table Screen
(Figure 2-6), which is accessed by clicking on the specific Profile
Configuration Profile Details Screen
April 2003 8300-A2-GB20-00