Summary of Contents for Paradyne COMSPHERE 3810Plus
Page 1
You have accessed an older version of a Paradyne product document. Paradyne is no longer a subsidiary of AT&T. Any reference to AT&T Paradyne is amended to read Paradyne Corporation.
Page 2
Installation Instructions Document Number 3980-A2-GK42-00 June 1995 Overview The 3810Plus modem, Model 3980-A1-401 (Figure 1), Use these instructions to install your modem, and keep has different installation instructions than those shown in them with your User’s Guide. the COMSPHERE 3800Plus Modems User’s Guide (3980-A2-GB30-10).
19,200 bps. Also, low capacitance cables may be necessary for speeds greater than 19,200 bps or distances greater than 50 feet. The rear panel of a 3810Plus modem has the following switches and connectors (see Figure 2): An ON/Off power switch.
3810 Plus Dial-Line Connection Use the following procedure to connect the 3810Plus modem to the dial network interface: 1. Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL (Figure 2). 2. Insert the other end of the modular cord into the dial network interface (“demarc”).
Network Management System Connection For the 3810Plus or 3820Plus modem, use the following procedure to connect the modem to the network management system interface: 1. Insert the subminiature 4-position modular plug of the 3600 Hubbing Device (Figure 3) into the jack labeled NMS (Figure 2).