B. SNMP Agent
SNMP MIBs
The 8300 Endpoint supports the following industry-standard MIB (management
information base) files:
The 8300 Endpoint supports the following Enterprise-specific MIBs:
The enterprise-specific MIB files may be found at www.paradyne.com. Select
Support > MIBs .
B-2
rfc1573.mib
defines the IANAifType textual convention, and thus the
−
enumerated values of the ifType object defined in MIB-II's ifTable
rfc1907.mib
SNMPv2 entities (initial revision published as RFC 1450)
−
rfc2011.mib
for managing IP and ICMP implementations, but excluding their
−
management of IP routes
rfc2012.mib
for managing TCP implementations
−
rfc2013.mib
for managing UDP implementations
−
rfc2096.mib
for the display of CIDR multipath IP routes
−
rfc2493.mib
provides textual conventions to be used by systems supporting
−
15-minute based performance history counts
rfc2514.mib
ATM Management MIB
−
rfc2515.mib
ATM Management MIB
−
rfc2571.mib
the SNMP Management Architecture MIB
−
rfc2863.mib
describes generic objects for network interface sub-layers (This
−
MIB is an updated version of MIB-II's ifTable, and incorporates the extensions
defined in RFC 1229.)
rfc3276.mib
MIB module for SHDSL
−
ds8200tc.mib
textual conventions used by DS8200 MIB
−
ds8200v2.mib
provides T1 configuration and statistics information
−
ipadatm.mib
proprietary extensions to ATM Management MIBs
−
ipadv2.mib
provides Frame Relay, PPP, and Service Aware configuration
−
and statistics
ipstart.mib
MIB module for synchronous PPP
−
router.mib
provides configuration of OSPF router
−
April 2003
8300-A2-GB20-00