Paradyne Hotwire 8300 User Manual page 41

NOTICE:
To view details about the current condition of IP, ICMP (In and Out), TCP, and UDP
parameters, click on the Ethernet Stats button at the bottom of the screen. The
Ethernet Stats screen
is simply a representation of the applicable MIB II parameters.
Figure 2-19. Ethernet Stats Screen
Click on the Unit Access Table button on the Ethernet (IP Details) screen to view
the Unit Access Table
that may access the unit's parameters. If no IP networks are supplied, any host
may access the unit. Select any Index number on the table to view the Unit Access
Details
8300-A2-GB20-00
To use newly established IP parameters, you must Submit and Save
Save and Restart
and Restart. (See
(Figure 2-19) contains no user-selectable fields or options; it
(Figure 2-20), which specifies up to 10 different IP networks
(Figure 2-21) that correspond with that Index number.
April 2003
2. Web Server Interface
on page 2-5.)
2-23