Table of Contents
Advertisement
3. VT100 Interface
At least one circuit must be defined to create a Static ARP Table entry because an
ARP entry is always associated with a circuit. The static ARP table is useful when
a Host does not respond to an ARP request. Access this menu by selecting Static
ARP Table from the IP Gateway menu.
Figure 3-47. Static ARP Table Screen
The fields listed below are displayed on the Static ARP Table screen.
3-56
Field
Description
Endpoint
Endpoint name (or Interface) through which to send the IP packet
to reach the defined IP Address. Currently, this is always the LAN.
IP Address
The IP Address of the unit for which you want to define the MAC
Address.
MAC Address
The MAC Address of the host to be reached.
ARP Status
Displays whether this static ARP is enabled or disabled.
April 2003
8300-A2-GB20-00
Advertisement
Table of Contents
