Paradyne Hotwire 8300 User Manual page 47

ATM Statistics Screen
Clicking on the ATM Statistics button on the ATM Service Details screen will
display the screen shown in
Figure 2-26. ATM Statistics Screen
There are ninety-six 15-minute buckets available for ATM statistics. If the unit is
powered on at 01:00 PM, the first interval will be completed at 01:15 PM;
subsequent intervals would be completed at xx:30, xx:45, xx:00 and xx:15. Interval
1 is always the latest (most recent) interval, and interval 96 will always be the
oldest.
The table on the ATM Statistics screen shows a summary that includes all 96
buckets. You can choose to see the statistics for any given bucket by selecting the
desired Period Index from the pull-down menu and clicking the Submit button.
Alternatively, you can display all intervals at once by clicking the All ATM Intervals
button beneath the table. The MIB (ipad.mib) describes each available statistic.
The ATM Statistics table is divided into three sections: Transmit, Receive and
Status. Each section provides real-time updates on the following statistics:
8300-A2-GB20-00
Figure
Transmit section
— Frames current number of good frames transmitted
−
— Errored Frames current number of frames in error
−
— Bytes current number of bytes sent
−
Receive
— Frames current number of good frames received
−
— Errored Frames current number of frames in error
−
— Bytes current number of bytes received.
−
Status
April 2003
2-26.
2. Web Server Interface
2-29