Table of Contents
Advertisement
DHCP Server Details Screen
The DHCP Server Details screen
described below.
Figure 3-69. DHCP Server Details Screen
Enable
Enables or disables the DHCP Server. Default is Enable.
Number of Ports
Defines the number of DHCP ports to be used. In this version, only 1 is a valid
value.
TTL
Time to Live for any DHCP packet. Default is 64.
Service Type
Type of Service used by the DHCP Server packet. Default is 1.
Lease Time
Tells the DHCP client the number of seconds it can retain this IP Address. The
client should make a new DHCP request within the specified amount of time to
ensure the IP Address is not given to another PC. Default is 600 seconds.
Primary DNS IP
If requested by DHCP client, the client then uses this address to resolve names of
Addr
IP Addresses. Default is 0.0.0.0.
Secondary DNS IP
If requested by DHCP client, the client then uses this secondary address to
Addr
resolve names of IP Addresses. Default is 0.0.0.0.
Domain Name
Domain name to be used by all DHCP clients. Default is user's server.
Router IP Addr
IP Address that all clients use for Gateway or Router. Default is 0.0.0.0.
8300-A2-GB20-00
(Figure
3-69) lets you configure the parameters
April 2003
3. VT100 Interface
3-77
Advertisement
Table of Contents
